Need help getting started with XtremeTV?
XtremeTV Support
We’ve got you covered with step-by-step guides.
programming guides
EASY REMOTE SETUP
- Manually turn the TV on.
- Press the TV button.
- Press and hold SETUP until the TV button blinks twice.
- Press and release the TV button one time. The TV button stays lit for 10 seconds.
- Find your device and brand from the cart below and note the DIGIT key assigned to your brand.
- Press and hold down the DIGIT key for your brand while pointing the remote at the TV and let go of the key when your device turns OFF.
- Setup for that device is complete.
AUTO SEARCH METHOD FOR BIG BUTTON REMOTE
- Turn on the equipment that you want the remote control to operate (Cable Box or TV).
- Press the [DEVICE] button simultaneously for 3 seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 30 seconds. The next step must be entered while the LED is on.
- Press the [CH ▲] OR [CH▼] button one at a time or keep it pressed. The remote will emit a series of Power ON/OFF code signals. Release the [CH▲] OR [CH ▼] as soon as the equipment turns off. *Note: You can verify that you have selected the correct code by pressing the [POWER] button. The equipment should turn back on. Then try all of the functions on the remote control (i.e. volume, mute, etc.) to ensure you have the correct code. If any of the functions do not operate as they should, repeat the instructions from STEP 3 above to continue the Auto Search Method.
- Press the same [DEVICE] button to store the code. The Device LED will blink twice to confirm that the code has been stored.
TURN ON THE TV AND FOLLOW THE STEPS BELOW TO SEARCH THROUGH ALL CODES.
Be sure to point the remote at your TV during setup.
- Press and hold SETUP until the LED blinks twice.
- Press the TV POWER key.
- Aim the remote at your TV and press and hold down the OK key.
- Release the key when the TV turns off and setup is complete.
- Your TV should be ON. Press the TV button one time.
- Press and hold SETUP until the TV button blinks twice.
- Enter numbers 9 9 1 on your remote number pad.
- Press the channel up button slowly, repeatedly until your TV turns Off. (Stop pressing the channel up button as soon as the TV turns off).
- Press and hold SETUP until the TV button blinks twice to lock in the code.
XtremeTV Set Top Box hook up
Amino A140 Set Top Box
- 1) S-Video Connects the receiver to your TV to provide high-quality video – provides video only.
- 2) HDMI (High Definition Media Interface) Connects the receiver to an HDTV to provide best quality HDTV – provides video and audio.
- 3) Power Provides power to the receiver.
- 4) Reset No function at this time.
- 5) Network Connects the receiver to the video service using a CAT5 Ethernet cable.
- 6) Optical Audio (S/PDIF) Connects the receiver to a home theatre system to provide surround sound audio – provides audio-only.
- 7) Out Connects the receiver to the TV using a standard coax cable – provides video and audio.
- 8) In Connects the receiver to the video service using a standard coax cable – provides audio and video.
- 9) USB (Universal Serial Bus) Connects the receiver to technician’s equipment and other devices.
XtremeTV Set Top Box hook up
Amino A540 DVR Set Top Box
- 1) RF Out Connects the receiver to the TV using a standard coax cable – provides video and audio.
- 2) S-Video Connects the receiver to your TV to provide high-quality video – provides video only.
- 3) Optical Audio (S/PDIF) Connects the receiver to a home theatre system to provide surround sound audio – provides audio only.
- 4) HDMI (High Definition Media Interface) Connects the receiver to an HDTV to provide best quality HDTV – provides video and audio.
- 5) USB (Universal Serial Bus) Connects the receiver to technician’s equipment and other devices.
- 6) Network Connects the receiver to the video service using a CAT5 Ethernet cable.
- 7) Power Provides power to the receiver.
- 8) Reset No function at this time.
